Hey auto,
okay so I am all good as far modules and permissions. raw1394 is in my audio group and it's set to load when I boot.
I went ahead and compiled the FFADO source, like you recommended. I also compiled Jack from source, as it was recommended in the link you posted and here is what I am getting now....
Code: Select all
17:20:03.538 Patchbay deactivated.
17:20:03.561 Statistics reset.
17:20:03.580 ALSA connection graph change.
17:20:03.777 ALSA connection change.
17:20:23.009 Startup script...
17:20:23.010 artsshell -q terminate
sh: artsshell: not found
17:20:23.413 Startup script terminated with exit status=32512.
17:20:23.413 JACK is starting...
17:20:23.414 /usr/bin/jackd -P70 -m -dfirewire -dhw:0 -r44100 -p128 -n2
jackd 0.120.1
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
Memory locking is unlimited - this is dangerous. You should probably alter the line:
@audio - memlock unlimited
in your /etc/limits.conf to read:
@audio - memlock 2946405
17:20:23.432 JACK was started with PID=10059.
no message buffer overruns
JACK compiled with System V SHM support.
loading driver ..
01716429774: (ffado.cpp)[ 92] ffado_streaming_init: libffado 2.999.0-1904 built Sep 29 2010 16:40:09
01716594748: [31mWarning (dice_eap.cpp)[1398] read: No routes found. Base 0x7, offset 0x4000
[0m01716621426: [31mWarning (dice_eap.cpp)[ 881] updateNameCache: What is this function about?
[0mfirewire ERR: Error creating FFADO streaming device
cannot load driver module firewire
no message buffer overruns
17:20:24.107 JACK was stopped successfully.
17:20:24.107 Post-shutdown script...
17:20:24.108 killall jackd
jackd: no process found
17:20:24.517 Post-shutdown script terminated with exit status=256.
17:20:25.943 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
So I also noticed that when I ran ffado-bus-server, I get a mismatch....
Code: Select all
$ -----------------------------------------------
FFADO Control DBUS service
Part of the FFADO project -- www.ffado.org
Version: 2.0.0
(C) 2008, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------
Library version mismatch. (required: libffado 2.0.0, present: libffado 2.999.0-1904)
Please run this application against the exact corresponding library
it was compiled for. The most common cause for this is having more
than one version of libffado installed.
no message buffer overruns
Now I was under the impression that this would take care of that......
Code: Select all
$ sudo apt-get build-dep libffado
$ sudo apt-get install build-essential libavc1394-dev python-qt4-dev subversion libtool
....but it hasn't. So do I have to recompile everything that corresponds to it or did I miss something?
Thanks again for all your help,
sp