Go 24 channels out with RME Fireface UFX II

Talk about your MIDI interfaces, microphones, keyboards...

Moderators: MattKingUSA, khz

Post Reply
rugubara
Established Member
Posts: 3
Joined: Sat May 02, 2015 10:15 am

Go 24 channels out with RME Fireface UFX II

Post by rugubara »

Hello, colleagues

I run successfully RME Fireface UFX II with 22 ch in/22 ch out. RME advertise in their docs that CC mode supports 24 channels in/out. I can configure the 2nd toslink port to be SPDIF (I need SPDIF) and these are ports 23/24 in CC.

Increasing the number of ports in jack doesn't help. Is there are way to get 24 ports in/out for this hardware?

Thanks
Anton.
cyborg440
Posts: 2
Joined: Tue Nov 16, 2021 11:51 am

Re: Go 24 channels out with RME Fireface UFX II

Post by cyborg440 »

Hi,

Did you ever find a way. I have a similar issue. I'd like to use the 2nd ADAT channels, so I should have 30 i/o, but I only get 22.
rugubara
Established Member
Posts: 3
Joined: Sat May 02, 2015 10:15 am

Re: Go 24 channels out with RME Fireface UFX II

Post by rugubara »

I still have only 22 channels. I've re-arranged my hardware to make use of analog connections of my UFX II and was done with the problem.
cyborg440
Posts: 2
Joined: Tue Nov 16, 2021 11:51 am

Re: Go 24 channels out with RME Fireface UFX II

Post by cyborg440 »

Thanks for getting back! Oh, that's a pity.
Post Reply