it maybe related to the daw..sysrqer wrote:I can load all of my win vsts (synths make sound) in qtractor but none of the guis will show. Seems like there are a few problems there.Linuxmusician01 wrote:In Qtractor I can get no synthesizer .dll plugin whatsoever working with LinVST. All the buttons and knobs of the synths go berserk (keep on turning frantically, go on and off 1.000 times a second etc.). So my list is empty. LinVST bridged plugins might work in other DAW's though...
Just my 2 cents.
LinVST - working plugs / libraries you use for compatibility (March 2019)
Moderators: MattKingUSA, khz
-
- Established Member
- Posts: 193
- Joined: Sat Sep 10, 2016 8:28 pm
- Has thanked: 3 times
- Been thanked: 2 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
https://soundcloud.com/lnprk13 (DAW) - https://soundcloud.com/chrisnmusic1305 (Hardware)
-
- Established Member
- Posts: 193
- Joined: Sat Sep 10, 2016 8:28 pm
- Has thanked: 3 times
- Been thanked: 2 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
thx sysrqer ! added your list to post #1, + for Serum you must use "D2D1" library (disabled or native... at choice...) for it to work. (read post #1 "Serum" and/with "Omnisphere".)sysrqer wrote:Dune, Dune 2, The Glue, Ozone 6/7/8, Analogic Delay (and the others in the series), all the fabfilter plugins, kclip, psp plugins, Sony Oxford, Stillwell, Tokyo Dawn plugins, Toneboosters, URS, Valhalla, Variety of Sound, Wavearts5, Nova67p, Synth1, Diversion, FM8, Massive, Kairatune, Surge, Serum, Waves (not sure which version it was).
Had all those working before without any effort (I think Serum needed something but don't remember what). From my experience it's an exception if something doesn't work.
for all plugs i use "d2d1" & "gdiplus". sometimes the audio engine freezes in Bitwig, maybe when CPU/DSP goes high... but i can compose/plugins work.
https://soundcloud.com/lnprk13 (DAW) - https://soundcloud.com/chrisnmusic1305 (Hardware)
- Linuxmusician01
- Established Member
- Posts: 1543
- Joined: Mon Feb 23, 2015 2:38 pm
- Location: Holland (Europe)
- Has thanked: 774 times
- Been thanked: 143 times
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
I added this to my post above: "Correction: 32 bit VST's bridged via LinVST don't work in Qtractor. Downloaded a 64 bit one from here and it does work... For 32 bit (Windows) VST's in Qtractor you can use the DSSI bridged one or the Carla bridged one."sysrqer wrote:I can load all of my win vsts (synths make sound) in qtractor but none of the guis will show. Seems like there are a few problems there.Linuxmusician01 wrote:In Qtractor I can get no synthesizer .dll plugin whatsoever working with LinVST. All the buttons and knobs of the synths go berserk (keep on turning frantically, go on and off 1.000 times a second etc.). So my list is empty. LinVST bridged plugins might work in other DAW's though...
Just my 2 cents.
What version of Qtractor do you use? I use 0.9.1 from the KXStudio repository.
- sysrqer
- Established Member
- Posts: 2523
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 320 times
- Been thanked: 152 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
Definitely, they work in renoise, reaper, ardour.Mk2 wrote:it maybe related to the daw..sysrqer wrote:I can load all of my win vsts (synths make sound) in qtractor but none of the guis will show. Seems like there are a few problems there.Linuxmusician01 wrote:In Qtractor I can get no synthesizer .dll plugin whatsoever working with LinVST. All the buttons and knobs of the synths go berserk (keep on turning frantically, go on and off 1.000 times a second etc.). So my list is empty. LinVST bridged plugins might work in other DAW's though...
Just my 2 cents.
- sysrqer
- Established Member
- Posts: 2523
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 320 times
- Been thanked: 152 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
Yeah I'm using the kxstudio version as well. All my vsts are 32 bit so that makes sense.Linuxmusician01 wrote: What version of Qtractor do you use? I use 0.9.1 from the KXStudio repository.
-
- Established Member
- Posts: 193
- Joined: Sat Sep 10, 2016 8:28 pm
- Has thanked: 3 times
- Been thanked: 2 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
i have impression 32 bits works better than 64 bits in general.... apart Omnisphere that is x64 since 2.5.sysrqer wrote:Yeah I'm using the kxstudio version as well. All my vsts are 32 bit so that makes sense.Linuxmusician01 wrote: What version of Qtractor do you use? I use 0.9.1 from the KXStudio repository.
i gonna add some verb plugs... some works, protoverb ask for a .txt file / permissions, wont work.. any fix ?
also, did u successfully installed ILOK anyone ?
https://soundcloud.com/lnprk13 (DAW) - https://soundcloud.com/chrisnmusic1305 (Hardware)
- sysrqer
- Established Member
- Posts: 2523
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 320 times
- Been thanked: 152 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
Yeah my experience was that 32 bit works better overall, but that experience was a while ago so may not be up to date now. It works for me so I haven't had any need to experiment.
-
- Established Member
- Posts: 193
- Joined: Sat Sep 10, 2016 8:28 pm
- Has thanked: 3 times
- Been thanked: 2 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
MPX Lexicon > OK.......;
use "winetricks" to include the library. I am using wine version 4.2 (not staging).
1 - go to your terminal
2 - digit "winetricks"
3 - check mark "select default wineprefix"
4 - press OK
5 - check mark "install a windows dll or component"
6- press OK
7 - choose mfc42.dll
8-then follow with OK and you are done.
_____________************************
9-just install mpx lexicon
TY "M...."..........
(ilok / pace installer has no worked.)
use "winetricks" to include the library. I am using wine version 4.2 (not staging).
1 - go to your terminal
2 - digit "winetricks"
3 - check mark "select default wineprefix"
4 - press OK
5 - check mark "install a windows dll or component"
6- press OK
7 - choose mfc42.dll
8-then follow with OK and you are done.
_____________************************
9-just install mpx lexicon
TY "M...."..........
(ilok / pace installer has no worked.)
https://soundcloud.com/lnprk13 (DAW) - https://soundcloud.com/chrisnmusic1305 (Hardware)
-
- Established Member
- Posts: 54
- Joined: Fri Apr 25, 2014 11:47 pm
- Has thanked: 2 times
- Been thanked: 3 times
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
Variety of Sound, LePou, Voxengo(only free ones tested), Kjaerhus classic series, Damage Audio Rough Rider and Ignite Amps with no tweaks in Reaper and Mixbus using LinVst, KxStudio wine-rt and LMDE2.
-
- Established Member
- Posts: 193
- Joined: Sat Sep 10, 2016 8:28 pm
- Has thanked: 3 times
- Been thanked: 2 times
- Contact:
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
badly, i had to left the mpx on a lexicon usb dongle... coz they never respect libertad... so u got to deal with that.
3..............
3..............
https://soundcloud.com/lnprk13 (DAW) - https://soundcloud.com/chrisnmusic1305 (Hardware)
-
- Established Member
- Posts: 2325
- Joined: Sat Jun 21, 2014 8:37 pm
- Been thanked: 256 times
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
Fathom modular synth (newest 2.31) seems fine by linvst,
latest linux Reaper and wine-staging. There is a free mono version,
a CM magazine version (many tutorials in the last two mag issues,
and if you buy the full version, any small-dollah updates you buy
will reduce your good customers price of the super-deluxe edition later on.
It's rare to have a plugin work in wine/reaper, but not work
in linux/reaper when wrapped by linvst.
Cheers
latest linux Reaper and wine-staging. There is a free mono version,
a CM magazine version (many tutorials in the last two mag issues,
and if you buy the full version, any small-dollah updates you buy
will reduce your good customers price of the super-deluxe edition later on.
It's rare to have a plugin work in wine/reaper, but not work
in linux/reaper when wrapped by linvst.
Cheers
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
hi with av linux 64 and pre installed lin vst i stay test my plug in licenced on windows.....crystal grenoak,waldorf edition 2.1,korg m1, korg monopoly,korg ms 20,korg wavestation,free alpha (lin plug in) arturia jupiter 8v2 and prophet v2 works.....native instruments i have some problems with native access and various plug in (absynth 5,reaktor 5 and other)
gennaro
gennaro
Hp Elite 8200 3,1 Ghz - 16 Giga Ram Hd 2 Terabyte - Mx Linux 19.4-Ardour 6.8 - Mixbus 7
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
-
- Established Member
- Posts: 90
- Joined: Mon Mar 17, 2014 8:01 pm
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
ARIA Player/sforzando sfz player work great if you install corefonts and tahoma via winetricks. Works with linvst or carla bridges and can get down to buffer sizes of 64/128 if you have a recent i5 or ryzen 5 system.
Re: LinVST - working plugs / libraries you use for compatibility (March 2019)
Hi update list of plug in lin vst work in avlinux 64 - arturia jupiter 8v2 - 8v3 - prophet vs 2 - prophet vs 3 - absynth 4 - fm8
gennaro
PS: i have used for test Waveform 9 trackion daw . In Ardour 5.12 and mixbus 5.2 i must start new testing....
gennaro
PS: i have used for test Waveform 9 trackion daw . In Ardour 5.12 and mixbus 5.2 i must start new testing....
Hp Elite 8200 3,1 Ghz - 16 Giga Ram Hd 2 Terabyte - Mx Linux 19.4-Ardour 6.8 - Mixbus 7
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)
Asus X54c - Mx Linux 19.4-Ardour 6.8- Mixbus 7-RPI3 + Raspbian Buster- Rpi4 (4giga ram)