Code: Select all
aconnect -o
client 14: 'Midi Through' [type=kernel]
0 'Midi Through Port-0'
client 24: 'Hammerfall DSP' [type=kernel,card=2]
0 'HDSP MIDI 1
Code: Select all
aplaymidi -p 24:0 k4.mid
Moderators: MattKingUSA, khz
Code: Select all
aconnect -o
client 14: 'Midi Through' [type=kernel]
0 'Midi Through Port-0'
client 24: 'Hammerfall DSP' [type=kernel,card=2]
0 'HDSP MIDI 1
Code: Select all
aplaymidi -p 24:0 k4.mid
Since the Kawai sysex file is .mid I have been trying to use aplaymidi. Maybe I should just try it and see what happens.amidi handles only files containing raw MIDI commands, without timing information. amidi does not support Standard MIDI (.mid) files, but aplaymidi(1) and arecordmidi(1) do.
Step #4 is where I’m having trouble, I can’t find the hardware.0. Switch on your K4 and sound interface. Set the K4 to: INT PROTECT = OFF, RCV EXCL = ON and RCV CH = 1.
1. Open Reaper and create a new track (right click on the left pane).
2. Load "k4.mid" to that track.
3. On the track controls in the left pane, click the "io" button.
4. Set "Midi Hardware Output" to your sound interface where your K4 is conected.
5. Play the midi file. Your K4 should now receive the settings from the file.
6. Hold all your thumbsup and check if your K4 will play that funky music once again