USB & Ethernet dead

Talk about your MIDI interfaces, microphones, keyboards...

Moderators: MattKingUSA, khz

Post Reply
avicitiffany
Posts: 1
Joined: Wed Dec 13, 2017 1:43 pm

USB & Ethernet dead

Post by avicitiffany »

HI all,

I got my RPi an flashed debian & arch.

It all boots up, 5V & 3,3V is stable all the time, but no keyboard (HID) is recognized. Nor does the LNK LED flash, when I plug in a ethernet cable connected to the switch.

Bootup screen (debian) says eth0 is configured within rc.local but not present.

Is there any chance this is a problem I could fix on my own?

I tried different power sources (700mA, 1A, active USB HUB, ...)

Is there any way I check if the LAN9512 is working properly?

Thank you for your advice.






I didn't find the right solution from the internet.
References:
https://www.raspberrypi.org/forums/viewtopic.php?t=5766

Corporate Promo Video
tseaver
Established Member
Posts: 398
Joined: Mon Mar 13, 2017 6:07 am
Has thanked: 11 times
Been thanked: 98 times

Re: USB & Ethernet dead

Post by tseaver »

You might have better luck getting a useful reply on the Raspberry Pi forum: viewforum.php?f=53
Ubuntu, Mixbus32C; acoustic blues / country / jazz
Post Reply