...so, yes my Echo AF12 is switched on and the device has been working fine before. I did however notice some hickups when starting up lately...
Here you find the commands i found in the other topics and their outputs. Thanks for the help!
Code: Select all
FFADO diagnostic utility 2.2.9999
============================
(C) 2008 Pieter Palmers
2009-2010 Arnold Krille
=== CHECK ===
Base system...
kernel version............ 3.13.0-58-lowlatency
Preempt (low latency)... True
RT patched.............. False
old 1394 stack present.... False
old 1394 stack loaded..... False
old 1394 stack active..... False
new 1394 stack present.... True
new 1394 stack loaded..... True
new 1394 stack active..... True
/dev/raw1394 node present. False
/dev/fw* permissions:
crw------- 1 root root 251, 0 nov 30 15:48 /dev/fw0
User IDs:
uid=1000(onno) gid=1000(onno) groups=1000(onno),4(adm),24(cdrom),27(sudo),29(audio),30(dip),44(video),46(plugdev),108(lpadmin),114(sambashare)
Prerequisites (dynamic at run-time)...
gcc ............... gcc (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4
g++ ............... sh: 1: g++: not found
PyQt4 (by pyuic4) . sh: 1: pyuic4: not found
jackd ............. no message buffer overruns
path ............ /usr/bin/jackd
flags ........... sh: 1: pkg-config: not found
libraw1394 ........ sh: 1: pkg-config: not found
flags ........... sh: 1: pkg-config: not found
libavc1394 ........ sh: 1: pkg-config: not found
flags ........... sh: 1: pkg-config: not found
libiec61883 ....... sh: 1: pkg-config: not found
flags ........... sh: 1: pkg-config: not found
libxml++-2.6 ...... sh: 1: pkg-config: not found
flags ........... sh: 1: pkg-config: not found
dbus-1 ............ sh: 1: pkg-config: not found
flags ........... sh: 1: pkg-config: not found
Prerequisites (static at compile-time)...
gcc ............... gcc (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4
g++ ............... g++ (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4
PyQt4 (by pyuic4) . Python User Interface Compiler 4.10.4 for Qt version 4.8.6
jackd ............. sh: 1: jackd: not found
path ............
flags ........... Package jack was not found in the pkg-config search path.
libraw1394 ........ 2.1.0
flags ........... -lraw1394
libavc1394 ........ Package libavc1394 was not found in the pkg-config search path.
flags ........... Package libavc1394 was not found in the pkg-config search path.
libiec61883 ....... 1.2.0
flags ........... -liec61883 -lraw1394
libxml++-2.6 ...... 2.36.0
flags ........... -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/x86_64-linux-gnu/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/x86_64-linux-gnu/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lglib-2.0
dbus-1 ............ 1.6.18
flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1
uname -a...
Linux aelixihr-studio 3.13.0-58-lowlatency #97-Ubuntu SMP PREEMPT Wed Jul 8 03:24:29 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
Hardware...
Host controllers:
05:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Pinnacle Systems Inc. Device [11bd:000e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7d04000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f7d00000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
CPU info:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 58
Stepping: 9
CPU MHz: 3292.386
BogoMIPS: 6584.77
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
Configuration...
IRQ information
Hardware Interrupts:
--------------------
IRQ 0: PID: None, count: [30, 0, 0, 0, 0, 0, 0, 0], Sched None (priority None), drivers: ['timer']
IRQ 1: PID: None, count: [1, 0, 0, 1, 0, 1, 0, 0], Sched None (priority None), drivers: ['i8042']
IRQ 8: PID: None, count: [1, 0, 0, 0, 0, 0, 0, 0], Sched None (priority None), drivers: ['rtc0']
IRQ 9: PID: None, count: [0, 0, 0, 0, 0, 0, 0, 0], Sched None (priority None), drivers: ['acpi']
IRQ 12: PID: None, count: [1, 0, 0, 0, 1, 0, 1, 1], Sched None (priority None), drivers: ['i8042']
IRQ 16: PID: None, count: [73, 167, 4, 389, 12, 4199, 4, 5474], Sched None (priority None), drivers: ['ehci_hcd:usb1']
IRQ 19: PID: None, count: [17812, 1448, 1240, 1698, 1093439, 1485, 1300, 27843], Sched None (priority None), drivers: ['firewire_ohci']
IRQ 23: PID: None, count: [22, 1, 2, 0, 6, 1, 1, 0], Sched None (priority None), drivers: ['ehci_hcd:usb2']
IRQ 40: PID: None, count: [0, 0, 0, 0, 0, 0, 0, 0], Sched None (priority None), drivers: ['dmar0']
IRQ 42: PID: None, count: [0, 0, 0, 0, 0, 0, 0, 0], Sched None (priority None), drivers: ['xhci_hcd']
IRQ 43: PID: None, count: [79, 6596, 1, 1, 14, 2, 1, 3], Sched None (priority None), drivers: ['eth0']
IRQ 44: PID: None, count: [3058, 1519, 1665, 428, 8590, 3586, 7290, 500], Sched None (priority None), drivers: ['ahci']
IRQ 45: PID: None, count: [10, 2, 1, 3, 0, 1, 6, 1], Sched None (priority None), drivers: ['mei_me']
IRQ 46: PID: None, count: [3004, 1082, 1022, 837, 10357, 936, 1069, 602], Sched None (priority None), drivers: ['radeon']
IRQ 47: PID: None, count: [4, 2, 3, 2, 1, 10, 0, 7], Sched None (priority None), drivers: ['snd_hda_intel']
Software Interrupts:
--------------------
=== REPORT ===
FireWire kernel drivers:
The new FireWire kernel stack is loaded.
If running a kernel earlier than 2.6.37 and problems are experienced, either
try with the old Firewire kernel stack or upgrade to a newer kernel
(preferrably 2.6.37 or later).