They don't seem to work, I got ardour and renoise to see them but they are blacklisted on both.funkmuscle wrote:has anyone tried the Reaper plugins in Ardour? I can't get Reaper to work at all with the Arch build so I've downloaded the tarball and noticed the plugins folder.
I would like to try them in Ardour but not sure where to have ardour look.
Linux REAPER works!
Moderators: raboof, MattKingUSA, khz
- sysrqer
- Established Member
- Posts: 2520
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 319 times
- Been thanked: 148 times
- Contact:
Re: Linux REAPER works!
- sysrqer
- Established Member
- Posts: 2520
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 319 times
- Been thanked: 148 times
- Contact:
Re: Linux REAPER works!
I've managed to find a fix for the problem, running reaper in a terminal I was seeing lots of this message:glowrak guy wrote: ...
Code: Select all
err:winediag:xrandr12_init_modes Broken NVIDIA RandR detected, falling back to RandR 1.0. Please consider using the Nouveau driver instead.
Code: Select all
winetricks orm=backbuffer glsl=disable
- GMaq
- Established Member
- Posts: 2774
- Joined: Fri Sep 25, 2009 1:42 pm
- Has thanked: 520 times
- Been thanked: 555 times
Re: Linux REAPER works!
Hi,
A 5.407 build has been uploaded, it appears that libSwell is now included in the bundles:
http://www.bandshed.net/packages/reaper ... _amd64.deb
This is a catch-up testing package, I'm killer busy with work right now so I will very likely only post updates every few releases when active Linux Reaper development is going on...
A 5.407 build has been uploaded, it appears that libSwell is now included in the bundles:
http://www.bandshed.net/packages/reaper ... _amd64.deb
This is a catch-up testing package, I'm killer busy with work right now so I will very likely only post updates every few releases when active Linux Reaper development is going on...
- funkmuscle
- Established Member
- Posts: 2801
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 129 times
- Been thanked: 31 times
Re: Linux REAPER works!
can anyone tell me what is going on here?
the first few releases of Reaper worked on my Arch64 but as of the past 5 releases, I would not launch.
I get this message:
the first few releases of Reaper worked on my Arch64 but as of the past 5 releases, I would not launch.
I get this message:
Code: Select all
$ reaper5
no message buffer overruns
Segmentation fault (core dumped)
[harv@ROCKBOX ~]$ reaper5
AudioResampler::Register(..., FFmpeg)
Singleton 0x23a41a0 created...
AudioResampler::Register(..., Libav)
AudioOutputBackend::Register(..., OpenAL)
Singleton 0x22c8320 created...
AudioOutputBackend::Register(..., Pulse)
VideoDecoder::Register(..., CUDA)
Singleton 0x22c84b0 created...
VideoDecoder::Register(..., VAAPI)
VideoRenderer::Register(..., OpenGLWindow)
Singleton 0x23a8b20 created...
SubtitleProcessor::Register(..., LibASS)
Singleton 0x23a8eb0 created...
SubtitleProcessor::Register(..., FFmpeg)
AudioDecoder::Register(..., FFmpeg)
Singleton 0x23a83f0 created...
AudioEncoder::Register(..., FFmpeg)
Singleton 0x23a84c0 created...
ImageConverter::Register(..., FFmpeg)
Singleton 0x23a05e0 created...
MediaIO::Register(..., QIODevice)
Singleton 0x22e1e50 created...
MediaIO::Register(..., QFile)
AudioOutputBackend::Register(..., null)
VideoDecoder::Register(..., FFmpeg)
VideoEncoder::Register(..., FFmpeg)
Singleton 0x22e20e0 created...
Segmentation fault (core dumped)
-
- Established Member
- Posts: 315
- Joined: Mon Jan 02, 2017 9:46 am
- Has thanked: 1 time
- Been thanked: 5 times
Re: Linux REAPER works!
funkmuscle wrote:can anyone tell me what is going on here?
the first few releases of Reaper worked on my Arch64 but as of the past 5 releases, I would not launch.
I get this message:
Code: Select all
$ reaper5 no message buffer overruns Segmentation fault (core dumped) [harv@ROCKBOX ~]$ reaper5 AudioResampler::Register(..., FFmpeg) Singleton 0x23a41a0 created... AudioResampler::Register(..., Libav) AudioOutputBackend::Register(..., OpenAL) Singleton 0x22c8320 created... AudioOutputBackend::Register(..., Pulse) VideoDecoder::Register(..., CUDA) Singleton 0x22c84b0 created... VideoDecoder::Register(..., VAAPI) VideoRenderer::Register(..., OpenGLWindow) Singleton 0x23a8b20 created... SubtitleProcessor::Register(..., LibASS) Singleton 0x23a8eb0 created... SubtitleProcessor::Register(..., FFmpeg) AudioDecoder::Register(..., FFmpeg) Singleton 0x23a83f0 created... AudioEncoder::Register(..., FFmpeg) Singleton 0x23a84c0 created... ImageConverter::Register(..., FFmpeg) Singleton 0x23a05e0 created... MediaIO::Register(..., QIODevice) Singleton 0x22e1e50 created... MediaIO::Register(..., QFile) AudioOutputBackend::Register(..., null) VideoDecoder::Register(..., FFmpeg) VideoEncoder::Register(..., FFmpeg) Singleton 0x22e20e0 created... Segmentation fault (core dumped)
I'd guess that is something to do with one of your drivers.
Others have similar problems that don't have anything to do with Reaper https://sourceforge.net/p/qtav/discussi ... /2828bbaa/ https://github.com/wang-bin/QtAV/issues/848 https://github.com/wang-bin/QtAV/issues/520
I think video support has been added to the more recent Reaper updates, so Reaper is probably looking for video drivers and maybe there is something causing conflicts and bam it stops working.
Seems like it might be QtAV.
Re: Linux REAPER works!
On the latest version, I cannot load any vst. I tried Uhe's. Anyone can reproduce?
-
- Established Member
- Posts: 2315
- Joined: Sat Jun 21, 2014 8:37 pm
- Been thanked: 251 times
Re: Linux REAPER works!
Hi, I've been using 5.407 for a couple of days, on Mint 17, and 18.
Linux native plugins loading OK, including U-he. Also a dozen
windows plugins modified by Airwave.
Maybe rename the .REAPER folder, and start from a freshly
unarchived version, launch reaper from a terminal with these command steps:
cd folder-containing-reaper5
chmod +x reaper5
full-path-to-reaper5
Hopefully the terminal output will yield some info
With each release, read the reaper.ini texts to make sure
theyare what you like, paths to plugins are correct etc.
The reaper prefs for adding a new vst path are a tad flawed,
so double check you hit the 'apply' button, and that the added path
is in the reaper.ini file.
/home/urlwolf/.REAPER/reaper-vstplugins64.ini
this lists the plugins scanned by reaper
Good luck!
Linux native plugins loading OK, including U-he. Also a dozen
windows plugins modified by Airwave.
Maybe rename the .REAPER folder, and start from a freshly
unarchived version, launch reaper from a terminal with these command steps:
cd folder-containing-reaper5
chmod +x reaper5
full-path-to-reaper5
Hopefully the terminal output will yield some info
With each release, read the reaper.ini texts to make sure
theyare what you like, paths to plugins are correct etc.
The reaper prefs for adding a new vst path are a tad flawed,
so double check you hit the 'apply' button, and that the added path
is in the reaper.ini file.
/home/urlwolf/.REAPER/reaper-vstplugins64.ini
this lists the plugins scanned by reaper
Good luck!
Re: Linux REAPER works!
Thanks!
I got the vsts to show but it's kind of buggy over here (manjaro, normal kernel).
I'll check again in a few months.
Also, my usb midi keyboard doesn't show.
I got the vsts to show but it's kind of buggy over here (manjaro, normal kernel).
I'll check again in a few months.
Also, my usb midi keyboard doesn't show.
-
- Established Member
- Posts: 2315
- Joined: Sat Jun 21, 2014 8:37 pm
- Been thanked: 251 times
Re: Linux REAPER works!
edit: reaper prefs require you to activate your midi devices, and then connect
in the qjackctl MIDI tab, you can run a2jmidid -j default
then start reaper, and it will auto-connect
usb ports with blue plastic in the port are likely usb3,
and may not work. Have you booted without the keyboard/interface,
run aplay -l and arecord -l commands, save the listings,
then plug it in, run the commands again, and compare them?
Those with a high-end usb audio interface, it may need a powered hub,
despite the maker claiming it doesn't.
In the long run, a secondary install of some debian/ubuntu OS, even on
a recycled and externally cased drive, (about $50 for a new case,
including a used terrabyte drive) will be good luck. It will allow you
to see how the devs lay things out, and move your knowledge
over to your main system.
The devs mainly work in deb/ubuntu and clones, so as a side effect,
you'll be able to use early releases, and perhaps aid in packaging
for your home team.
Cheers
in the qjackctl MIDI tab, you can run a2jmidid -j default
then start reaper, and it will auto-connect
usb ports with blue plastic in the port are likely usb3,
and may not work. Have you booted without the keyboard/interface,
run aplay -l and arecord -l commands, save the listings,
then plug it in, run the commands again, and compare them?
Those with a high-end usb audio interface, it may need a powered hub,
despite the maker claiming it doesn't.
In the long run, a secondary install of some debian/ubuntu OS, even on
a recycled and externally cased drive, (about $50 for a new case,
including a used terrabyte drive) will be good luck. It will allow you
to see how the devs lay things out, and move your knowledge
over to your main system.
The devs mainly work in deb/ubuntu and clones, so as a side effect,
you'll be able to use early releases, and perhaps aid in packaging
for your home team.
Cheers
Re: Linux REAPER works!
Just keeping up to date with recent additions to REAPER for Linux. The addition of ALSA support didn't work for me at first, but as of 5.413 it gives dropdowns for selecting input and output. So now Jack, Pulse and ALSA backends are working. Still no ALSA midi support though, just Jack. Steady regular progress. Keeps getting better and basically fine for every day use.
v5.413 - May 25 2017
linux: ALSA/pulse fixes
linux: mousewheel fixes
other things
v5.412 - May 18 2017
linux: ALSA improvements
v5.411 - May 16 2017
linux: larger default UI scaling
linux: tweak preferences page font help
linux: tooltip support
linux: jack dynamic loading (if jack not installed, no problem!)
linux: dynamic pulseaudio support
linux: ALSA support (no MIDI though)
linux: set splash window title
linux: pass alt+keys to main window when docked (for menus)
linux: use reaper.ini for reamote swell
v5.413 - May 25 2017
linux: ALSA/pulse fixes
linux: mousewheel fixes
other things
v5.412 - May 18 2017
linux: ALSA improvements
v5.411 - May 16 2017
linux: larger default UI scaling
linux: tweak preferences page font help
linux: tooltip support
linux: jack dynamic loading (if jack not installed, no problem!)
linux: dynamic pulseaudio support
linux: ALSA support (no MIDI though)
linux: set splash window title
linux: pass alt+keys to main window when docked (for menus)
linux: use reaper.ini for reamote swell
- sysrqer
- Established Member
- Posts: 2520
- Joined: Thu Nov 14, 2013 11:47 pm
- Has thanked: 319 times
- Been thanked: 148 times
- Contact:
Re: Linux REAPER works!
I tried so do some work in this the other day and noticed few not so obvious things which caused me to give up. The dragging of tracks in to or out of groups seems pretty buggy, the red indicator line moves strangely and in one or two cases I tried it was actually impossible to place tracks where I wanted them to be.
Definitely improving though overall.
Definitely improving though overall.
-
- Established Member
- Posts: 68
- Joined: Fri Jan 01, 2010 8:57 pm
- Location: Hessen, Germany
- Has thanked: 1 time
- Been thanked: 1 time
Re: Linux REAPER works!
v5.50rc4 is there!
Working nicely as far as I've tried it. Don't know how much improvement there is over the previous (beta) versions but my old Windows sessions load and play great. But using almost entirely the built-in ReaPlugs. The few VSTi plugins I was using I replaced by carla-rack, which is of course a real gem in itself to have.
Even themes work: just download then drag and drop! (Don't know if this is worth mentioning but it sure thrills me)
I'm tempted to go freaking out rejoicing (OMG OMG, Linux Reaper has finally come...) but I'll still wait a bit.
Anyone know if LV2 support is planned? (THAT would actually freak me out )
Working nicely as far as I've tried it. Don't know how much improvement there is over the previous (beta) versions but my old Windows sessions load and play great. But using almost entirely the built-in ReaPlugs. The few VSTi plugins I was using I replaced by carla-rack, which is of course a real gem in itself to have.
Even themes work: just download then drag and drop! (Don't know if this is worth mentioning but it sure thrills me)
I'm tempted to go freaking out rejoicing (OMG OMG, Linux Reaper has finally come...) but I'll still wait a bit.
Anyone know if LV2 support is planned? (THAT would actually freak me out )
- funkmuscle
- Established Member
- Posts: 2801
- Joined: Mon Jun 02, 2008 2:30 pm
- Has thanked: 129 times
- Been thanked: 31 times
Re: Linux REAPER works!
hey, I'm on Arch on both my main desktop studio and my laptop.
Reaper runs on my laptop but on my desktop, I get this error:
anyone knows what's happening here?
Reaper runs on my laptop but on my desktop, I get this error:
Code: Select all
$ reaper5
(reaper5:4599): GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion 'g_type_from_name (name) == 0' failed
(reaper5:4599): GLib-CRITICAL **: g_string_insert_len: assertion 'len == 0 || val != NULL' failed
Segmentation fault (core dumped)
-
- Established Member
- Posts: 2315
- Joined: Sat Jun 21, 2014 8:37 pm
- Been thanked: 251 times
Re: Linux REAPER works!
Looks like there's a fresh new forum for linux reaper users:
https://forum.cockos.com/showthread.php?t=193760
https://forum.cockos.com/showthread.php?t=193760
- khz
- Established Member
- Posts: 1648
- Joined: Thu Apr 17, 2008 6:29 am
- Location: German
- Has thanked: 42 times
- Been thanked: 92 times
Re: Linux REAPER works!
Nice2 REAPER for Linux: $https://forum.cockos.com/forumdisplay.php?f=37
Reaper NINJAM Setup: https://forum.cockos.com/showthread.php?t=12578
Tutorial corner 00 - NinJAM Quickstart: Port Forward
https://www.youtube.com/watch?v=Ni5Q2qnB_HM
Reaper NINJAM Setup: https://forum.cockos.com/showthread.php?t=12578
Tutorial corner 00 - NinJAM Quickstart: Port Forward
https://www.youtube.com/watch?v=Ni5Q2qnB_HM
. . . FZ - Does humor belongs in Music?
. . GNU/LINUX@AUDIO ~ /Wiki $ Howto.Info && GNU/Linux Debian installing >> Linux Audio Workstation LAW
. . GNU/LINUX@AUDIO ~ /Wiki $ Howto.Info && GNU/Linux Debian installing >> Linux Audio Workstation LAW
- I don't care about the freedom of speech because I have nothing to say.