Page 6 of 10

Re: LSP Project

Posted: Fri Aug 23, 2019 10:16 pm
by Capoeira
sadko4u wrote:
Capoeira wrote: before I get into the truble of creating a room (or are there any usefull available to download?) for this:
does this treat all frequencies as rays? only frequencies above the Schroeder Frequency behave like that.
It doesn't simulate frequencies. It simulates the spreading of the front of the wave. Different fronts of different waves come at the same place at the different instants of time, this is similar to mixing of the huge set of Comb filters, so finally you get some impulse response at the point and, as a result, a frequency response.

You can use rooms from presets or download them from this place:
https://github.com/sadko4u/lsp-plugins/ ... /models/3d
i saw your video on youtube after my post. I don't think it will do what I want to do. it makes perfect sense for creating reverbs at will, and is fantastic as such.
my intention is to create an IR of a virtual studio (with all the treatment) to create a "room" for my headphones. I guess my whish is too comlplex for this software!?

Re: LSP Project

Posted: Fri Aug 23, 2019 10:27 pm
by funkmuscle
Capoeira wrote:
sadko4u wrote:
Capoeira wrote: before I get into the truble of creating a room (or are there any usefull available to download?) for this:
does this treat all frequencies as rays? only frequencies above the Schroeder Frequency behave like that.
It doesn't simulate frequencies. It simulates the spreading of the front of the wave. Different fronts of different waves come at the same place at the different instants of time, this is similar to mixing of the huge set of Comb filters, so finally you get some impulse response at the point and, as a result, a frequency response.

You can use rooms from presets or download them from this place:
https://github.com/sadko4u/lsp-plugins/ ... /models/3d
i saw your video on youtube after my post. I don't think it will do what I want to do. it makes perfect sense for creating reverbs at will, and is fantastic as such.
my intention is to create an IR of a virtual studio (with all the treatment) to create a "room" for my headphones. I guess my whish is too comlplex for this software!?
Cap, I think you're looking for this? I was about to ask if the LSP plugin will evolve to this:
https://www.youtube.com/watch?v=r7uEcub9QfY

Re: LSP Project

Posted: Fri Aug 23, 2019 10:58 pm
by Capoeira
funkmuscle wrote:
Capoeira wrote:
sadko4u wrote: It doesn't simulate frequencies. It simulates the spreading of the front of the wave. Different fronts of different waves come at the same place at the different instants of time, this is similar to mixing of the huge set of Comb filters, so finally you get some impulse response at the point and, as a result, a frequency response.

You can use rooms from presets or download them from this place:
https://github.com/sadko4u/lsp-plugins/ ... /models/3d
i saw your video on youtube after my post. I don't think it will do what I want to do. it makes perfect sense for creating reverbs at will, and is fantastic as such.
my intention is to create an IR of a virtual studio (with all the treatment) to create a "room" for my headphones. I guess my whish is too comlplex for this software!?
Cap, I think you're looking for this? I was about to ask if the LSP plugin will evolve to this:
https://www.youtube.com/watch?v=r7uEcub9QfY
hey man. we are always on the same wavelenght. lol
I was looking into Waves NX today, which kind of sucks in the youtube demos (no real virtual room, more of a sufisticated pan). but i downloaded their base software which enables the demos. I will definitly demo this from the video, too. thanks.
here they discuss more software of this kind (I will demo all I can): https://vi-control.net/community/thread ... ack.72822/
btw. I worked a lot on Room 4 of ASH-IR which has unfortunatly a lot of problems in the low end (high end professional studio. why?). I still owe you a topic. and I will make one once I found my final solution. I don't think algos can realy simulate a room (but as I said I will demo them). the IR convolution solution is perfect, IF you can find a binaural room impulse response of a "perfect room". unfortunatly those perfect IRs don't seam to be available. maybe they use this tecnology in the video you linked? I will try out

EDIT: btw: here I show the old room 4 (he updated it after I told him about the shitty low end; didn't realy solve it) -have to use headphones; obviously-: https://www.youtube.com/watch?v=3TJC0NF ... e=youtu.be featuring LSP software lol
I have played around with the raw IRs from Room 4 he sent me and DRCed them. they got better. but you can't DRC ringing. only make it softer

Re: LSP Project

Posted: Fri Aug 23, 2019 11:42 pm
by sadko4u
Capoeira wrote:i saw your video on youtube after my post. I don't think it will do what I want to do. it makes perfect sense for creating reverbs at will, and is fantastic as such.
my intention is to create an IR of a virtual studio (with all the treatment) to create a "room" for my headphones. I guess my whish is too comlplex for this software!?
I don't understand your purposes and use case. If you want to simulate an impulse response of the specific room, you can build model of this room and simulate the impulse response in the Room Builder plugin. The only one thing is, the more polygons you use, the slower algorithm does process your room. So I don't recommend to catch fleas: you can start with simulating the room form and objects inside of the room with low-polygon models.

Re: LSP Project

Posted: Tue Aug 27, 2019 1:00 pm
by Kott
I'm afraid that https://lsp-plug.in/ is down

Re: LSP Project

Posted: Tue Aug 27, 2019 8:15 pm
by sadko4u
Kott wrote:I'm afraid that https://lsp-plug.in/ is down
Sorry, troubles with my home provider. It should be recovered the next day (as I estimate).

Re: LSP Project

Posted: Wed Aug 28, 2019 6:20 pm
by sadko4u
The site is online again.

Re: LSP Project

Posted: Thu Aug 29, 2019 5:31 am
by Kott
great:)

Re: LSP Project

Posted: Sat Aug 31, 2019 3:47 pm
by lilith
I just discovered a bug in Reaper when using the VST Spectrum Analyzer x12. When changing the Tolerance Parameter the DAW crashes with

Code: Select all

./reaper 
jack: created client
jack: setting TIME_CRITICAL = 74
jack: activated client
 Segmentation fault
Maybe you need to change it several time until it crashes and keep the track playing while changing it.

Re: LSP Project

Posted: Sat Aug 31, 2019 6:29 pm
by lilith
Maybe I'm overseeing something. When I load the parametric EQ into Carla and save it under a carxp file the EQ settings are lost after starting carla again. With the EQ10 equalizer the settings are restored.

Re: LSP Project

Posted: Sat Aug 31, 2019 7:10 pm
by sadko4u
lilith wrote:I just discovered a bug in Reaper when using the VST Spectrum Analyzer x12. When changing the Tolerance Parameter the DAW crashes with

Code: Select all

./reaper 
jack: created client
jack: setting TIME_CRITICAL = 74
jack: activated client
 Segmentation fault
Maybe you need to change it several time until it crashes and keep the track playing while changing it.
Is it reproducible for other hosts?

Re: LSP Project

Posted: Sat Aug 31, 2019 7:11 pm
by sadko4u
lilith wrote:Maybe I'm overseeing something. When I load the parametric EQ into Carla and save it under a carxp file the EQ settings are lost after starting carla again. With the EQ10 equalizer the settings are restored.
Do you use latest Carla? I should try the version you use to see what's happening.

Re: LSP Project

Posted: Sat Aug 31, 2019 7:20 pm
by lilith
sadko4u wrote:
lilith wrote:Maybe I'm overseeing something. When I load the parametric EQ into Carla and save it under a carxp file the EQ settings are lost after starting carla again. With the EQ10 equalizer the settings are restored.
Do you use latest Carla? I should try the version you use to see what's happening.
Yes, Carla 2.0.0 . Thanks for looking into it.

Re: LSP Project

Posted: Sat Aug 31, 2019 7:24 pm
by sysrqer
lilith wrote:I just discovered a bug in Reaper when using the VST Spectrum Analyzer x12. When changing the Tolerance Parameter the DAW crashes with

Code: Select all

./reaper 
jack: created client
jack: setting TIME_CRITICAL = 74
jack: activated client
 Segmentation fault
Maybe you need to change it several time until it crashes and keep the track playing while changing it.
I can't reproduce with the LSP version in kxstudio repo and reaper 5.980.

Re: LSP Project

Posted: Sat Aug 31, 2019 7:33 pm
by lilith
Ardour crashes also. Then the problem is me.