Behringer FCA1616
Moderators: MattKingUSA, khz
Behringer FCA1616
I´m looking into getting this interface. Does anyone know if there are any problems using this with Linux? Does it work at all?
Re: Behringer FCA1616
Code: Select all
steeler@steeler-desktop:~$ cat /proc/asound/cards
0 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:12.2-5, high speed
1 [FCA1616 ]: USB-Audio - FCA1616
BEHRINGER FCA1616 at usb-0000:00:12.2-3, high speed
2 [CODEC ]: USB-Audio - USB Audio CODEC
Burr-Brown from TI USB Audio CODEC at usb-0000:00:12.1-1, full speed
steeler@steeler-desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: FCA1616 [FCA1616], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 2: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
steeler@steeler-desktop:~$
In my device, don't work the midi ports.
The rest is ok.
YouTube
Interfaces: Behringer FCA1616 - Presonus FP10
Kernel: 4.13.0-32-lowlatency
OS:Ubuntu Studio 16.04.3 LTS
Interfaces: Behringer FCA1616 - Presonus FP10
Kernel: 4.13.0-32-lowlatency
OS:Ubuntu Studio 16.04.3 LTS
-
- Established Member
- Posts: 897
- Joined: Thu Sep 11, 2014 3:04 pm
- Has thanked: 71 times
- Been thanked: 64 times
Re: Behringer FCA1616
How do you start the soundcard? I have a UMC404 and I can get MIDI with the example below (perhaps you already tried it on your FCA1616?)Steeler wrote: In my device, don't work the midi ports.
The rest is ok.
For testing, reboot computer, don't start any audio apps yet
Stop jackdbus
Code: Select all
killall -9 jackdbus
Code: Select all
ps -ef | grep jackdbus
Code: Select all
jackd -S -R -P89 -dalsa -dhw:FCA1616 -r48000 -p128 -n3 -Xraw
Start your audio application, Carla is useful for testing. Load a softsynth. Go to the patch panel and connect the midi devices (if it shows anything) and the sound outputs.
Some Focal / 20.04 audio packages and resources https://midistudio.groups.io/g/linuxaudio
Re: Behringer FCA1616
I bought the FCA1616 and hooked it up using Ubuntu 12.04 and JACK. Playback is very fast, chipmunk speed. How can I correct this?
Behringer FCA1616[Solved]
I hooked it up to a Windows 7 computer and used the firmware and driver from the Behringer site. Worked fine with Windows.....hooked up again with Linux and everything worked fine. Could it be the firmware update that fixed it? Just wondering.
Re: Behringer FCA1616
Hi
Just bought one and I'm using the USB I cant firewire to work on Ubuntu Studio.
It was initially set to 88 K out of the box.
I updated the firmware on a windows box and set the unit to 48K for use with Ardour.
I have to set the unit to optical on the front panel.
Does anyone know if Jack can reset the Sysnc? It would appear so as I get a bad click on changing the sample rate I assume that means the box has changed as well.
If your buying one make sure you update the firmware.
All in all working so far with jack and Ardour.
Cheers Bob
Just bought one and I'm using the USB I cant firewire to work on Ubuntu Studio.
It was initially set to 88 K out of the box.
I updated the firmware on a windows box and set the unit to 48K for use with Ardour.
I have to set the unit to optical on the front panel.
Does anyone know if Jack can reset the Sysnc? It would appear so as I get a bad click on changing the sample rate I assume that means the box has changed as well.
If your buying one make sure you update the firmware.
All in all working so far with jack and Ardour.
Cheers Bob
-
- Posts: 1
- Joined: Wed Feb 22, 2017 10:05 am
- Contact:
Re: Behringer FCA1616
We have one at work in the office. Works well on my Linux box. Never tried the MIDI inputs but as far as I remember JACK was able to see them. Not sure tho... Audio was fine.